EXM608A11防爆压电式及速度传感器
Intrinsically-safe, low-cost, general purpose, industrialceramic shear ICP® accel, 100 mV/g, 0.5 to 10k Hz, top exit, 10-ftintegral cable, single point ISO 17025 accredited calibration
Sensitivity: (±15%) 100 mV/g (10.2 mV/(m/s²))
Frequency Range: (±3dB) 30 to 600000 cpm (0.5 to 10000 Hz)
Sensing Element: Ceramic
Measurement Range: ±50 g (±490 m/s²)
Weight: 3.5 oz (99.3 gm)
All specifications are at room temperature unless otherwisespecified.
ProductNotes
[1] Conversion Factor 1g = 9.81 m/s².
[2] Zero-based, least-squares, straight line method.
[3] Typical.
[4] Twisted shielded pair.
[5] 1/4-28 has no e in S.I. units.
[6] See PCB Declaration of Conformance PS023 or PS060 fordetails.
Accessories:
| Supplied | |||
| 081A40 | Mounting Stud | (1) | |
| ICS-2 | NIST-traceable single-pointamplitude response calibration at 6000 cpm (100 Hz) for eachaxis | (1) | |
OptionalVersions:
(EX) Hazardous Area Approval- contact factory for specificapprovals
| ENGLISH | SI | |
| Hazardous Area Approval | EEx nL IIC T4,-40°C<=Ta<=121°C, II 3 G | |
| Hazardous Area Approval | EEx nL IIC T4,-40°C<=Ta<=121°C, II 1 G | |
| Hazardous Area Approval | Cl I, Div I, Groups A,B, C, D; Cl II, Div I, Groups E, F, G; Cl III, Div I | |
| Hazardous Area Approval | Cl I, Div 2, Groups A,B, C, D; ExnL IIC T4, AExnA IIC T4 | |
| Hazardous Area Approval | Ex ia IIC T4, AExia IIC,T4 | |
(LB) Low Bias Voltage
| ENGLISH | SI | |
| Output Bias Voltage | 4.8 to 6.5 | |
| Excitation Voltage | 12 to 28 | |
| Measurement Range | ±10 | ±98 |
(M) Metric Mount
| ENGLISH | SI |
| Accessories: | |||
| M081A61 | Mounting Stud | (1) | |
(TO) Temperature Output
| ENGLISH | SI | |
| Temperature Scale Factor | 5.56 mV/°F + 32 | +10 mV/°C |
| Electrical Connections (Red) | Acceleration Output | |
| Electrical Connections (Black) | Ground | |
| Temperature Output Range | +36 to +250 °F | +2 to +121 °C |
| Electrical Connector | Molded IntegralCable | |
| Electrical Connections (White) | Temperature Output | |
| English: | SI: | ||
|---|---|---|---|
| Performance | |||
| Sensitivity (±15 %) | 100 mV/g | 10.2 mV/(m/s²) | [1] |
| Measurement Range | ±50 g | ±490 m/s² | |
| Frequency Range (±3 dB) | 30 to 600000 cpm | 0.5 to 10000 Hz | |
| Resonant Frequency | 1320 kcpm | 22 kHz | [3] |
| Broadband Resolution (1 to 10000 Hz) | 350 µg | 3434 µm/sec2 | [3] |
| Non-Linearity | ±1 % | ±1 % | [2] |
| Transverse Sensitivity | ≤7 % | ≤7 % | |
| Environmental | |||
| Overload Limit (Shock) | 5000 g pk | 49050 m/s² pk | |
| Temperature Range | -65 to +250 °F | -54 to +121 °C | |
| Temperature Response | See Graph %/°F | See Graph %/°F | [3] |
| Enclosure Rating | IP68 | IP68 | |
| Electrical | |||
| Settling Time (within 1% of bias) | ≤2.0 sec | ≤2.0 sec | |
| Discharge Time Constant | ≥0.3 sec | ≥0.3 sec | |
| Excitation Voltage | 18 to 28 VDC | 18 to 28 VDC | |
| Constant Current Excitation | 2 to 20 mA | 2 to 20 mA | |
| Output Impedance | <150 Ohm | <150 Ohm | |
| Output Bias Voltage | 8 to 12 VDC | 8 to 12 VDC | |
| Spectral Noise (10 Hz) | 8 µg/√Hz | 78.5 (µm/sec2)/√Hz | [3] |
| Spectral Noise (100 Hz) | 5 µg/√Hz | 49.1 (µm/sec2)/√Hz | [3] |
| Spectral Noise (1 kHz) | 4 µg/√Hz | 39.2 (µm/sec2)/√Hz | [3] |
| Electrical Isolation (Case) | >100000000 Ohm | >100000000 Ohm | |
| Physical | |||
| Size - Hex | 9/16 in | 14 mm | |
| Size - Height | 2.5 in | 64 mm | |
| Weight (with cable) | 3.5 oz | 99.3 gm | |
| Mounting | Stud | Stud | |
| Mounting Thread | 1/4-28 Female | 1/4-28 Female | [5] |
| Mounting Torque | 2 to 5 ft-lb | 2.7 to 6.8 Nm | |
| Sensing Element | Ceramic | Ceramic | |
| Sensing Geometry | Shear | Shear | |
| Housing Material | Stainless Steel | Stainless Steel | |
| Sealing | Molded | Molded | |
| Electrical Connector | Molded Integral Cable | Molded Integral Cable | |
| Electrical Connection Position | Top | Top | |
| Cable Length | 10 ft | 3 m | |
| Cable Type | Polyurethane | Polyurethane | [4] |
