1380-03A/1404-03ADB称重传感器惊喜双重好礼
1380-03A
PCB L&T Rod End Load Cell, 2,000 lbf (8.9 kN) rated capacity,50% static overload protection, 3/4-16 male & female thread, steelconstruction
Measurement Range: 2000 lbf (8896 N)
Size - Diameter: 1.50 in (38.1 mm)
Size - Height: 4.25 in (107.9 mm)
Electrical Connector: PT02E-10-6P
| English: | SI: | ||
|---|---|---|---|
| Performance | |||
| Measurement Range | 2000 lbf | 8896 N | [1] |
| Sensitivity (±10 %) | 2 mV/V | 2 mV/V | [2] |
| Non-Linearity | ≤0.25 % FS | ≤0.25 % FS | |
| Hysteresis | ≤0.15 % FS | ≤0.15 % FS | |
| Non-Repeatability | ≤0.05 %RO | ≤0.05 %RO | |
| Resonant Frequency | 9 kHz | 9 kHz | |
| Environmental | |||
| Overload Limit | 3000 lbf | 13 kN | |
| Load Limit (Side Force, FX orFY) | 800 lbf | 3559 N | [3] |
| Load Limit (Bending Moment, MXor MY) | 2500 inf-lb | 282 Nm | [3] |
| Load Limit (Axial Torque,MZ) | 1250 inf-lb | 141 Nm | [3] |
| Temperature Range (Operating) | -20 to +200 °F | -28 to +93 °C | |
| Temperature Range (Compensated) | +70 to +170 °F | +21 to +77 °C | |
| Temperature Effect on Output (Maximum) | ±0.01 %Reading/°F | ±0.018 %Reading/°C | [4] |
| Temperature Effect on Zero Balance(Maximum) | ±0.005 %FS/°F | ±0.009 %FS/°C | [4] |
| Electrical | |||
| Bridge Resistance | 350 Ohm | 350 Ohm | [5] |
| Excitation Voltage (Recommended) | 10 VDC | 10 VDC | [6] |
| Insulation Resistance | >5000000000 Ohm | >5000000000 Ohm | |
| Zero Balance | ≤1 % FS | ≤1 % FS | |
| Output Polarity | Positive | Positive | |
| Output Polarity | +Tension | +Tension | |
| Physical | |||
| Size - Height | 4.25 in | 107.9 mm | [7] |
| Size - Diameter | 1.50 in | 38.1 mm | [7] |
| Weight | 1.0 lb | 454 g | |
| Mounting Thread | 3/4 - 16 Male | No Metric Equivalent | |
| Mounting Thread | 3/4 - 16 Female | No Metric Equivalent | |
| Cover Material | Anodized Aluminum | Anodized Aluminum | |
| Sensor Material | Anodized Aluminum | Anodized Aluminum | |
| Sensing Element | Strain Gage | Strain Gage | |
| Deflection at Full Scale Capacity | 0.0005 in | 0.013 mm | |
| Electrical Connector | PT02E-10-6P | PT02E-10-6P | |
Dual bridge load cell, fatigue rated low profile, 25 k lbs FS, 11/4 - 12 (F) thd, PT conn.
Specifically designed for airframe structural, lifetime and fatiguetesting applications on wings, fuselage, landing gear, iron birdand other airframe components. •Series 1400 includes a dual outputfeature that offers sensor redundancy and the ability to providecontrol feedback from one output while the other is used for dataac •A2LA accredited calibration to ISO 17025 in bothtension and compression directions •Fatigue rated load cells areguaranteed for 100 million fully-reversed cycles •Thermallycompensated •Moment compensated •A single shunt calibrationresistor is provided with each load cell for ease of calibration atthe test site
Measurement Range: 25 klb (111 kN)
Size - Diameter: 6.06 in (153.90 mm)
Size - Height: 3.50 in (88.90 mm)
Electrical Connector: PT02E-10-6P (2)
| English: | SI: | ||
|---|---|---|---|
| Performance | |||
| Measurement Range (100 x 10^6 cycles) | 25 klb | 111 kN | [2][4] |
| Sensitivity (±10 %) | 2.0 mV/V | 2.0 mV/V | [1][3] |
| Non-Linearity | ≤0.05 % FS | ≤0.05 % FS | |
| Hysteresis | ≤0.05 % FS | ≤0.05 % FS | |
| Non-Repeatability | ≤0.02 %RO | ≤0.02 %RO | |
| Creep (in 20 minutes) | 0.025 % | 0.025 % | |
| Static Error Band | ≤0.05 % FS | ≤0.05 % FS | [2] |
| Eccentric Load Sensitivity | 0.1 %/in | 0.1 %/25.4mm | |
| Resonant Frequency | 15 kHz | 15 kHz | |
| Side Load Sensitivity | 0.1 %/in | 0.1 %/25.4mm | |
| Environmental | |||
| Overload Limit | 75 klb | 334 kN | |
| Load Limit (Side Force, FX orFY) | 25 klb | 111 kN | [5] |
| Load Limit (Bending Moment, MXor MY) | 25k in-lb | 2825 Nm | [5] |
| Load Limit (Axial Torque,MZ) | 25k in-lb | 2825 Nm | [5] |
| Temperature Range (Operating) | -65 to +200 °F | -54 to +93 °C | |
| Temperature Range (Compensated) | +15 to +115 °F | -9 to +46 °C | |
| Temperature Effect on Output (Maximum) | ±0.0008 %Reading/°F | ±0.0018 %Reading/°C | [6] |
| Temperature Effect on Zero Balance(Maximum) | ±0.0008 %FS/°F | ±0.0018 %FS/°C | [6] |
| Electrical | |||
| Bridge Resistance | 350 Ohm | 350 Ohm | [1] |
| Excitation Voltage (Recommended) | 10 VDC | 10 VDC | [7] |
| Insulation Resistance | >5k GOhm | >5k GOhm | |
| Zero Balance | ≤1 %RO | ≤1 %RO | |
| Output Polarity | +Tension | +Tension | |
| Physical | |||
| Size - Height | 3.50 in | 88.90 mm | [8] |
| Size - Diameter | 6.06 in | 153.90 mm | [8] |
| Weight | 21 lb | 9.53 kg | |
| Mounting Thread | 1 1/4 - 12 UNF-3B | No Metric Equivalent | |
| Sensing Element | Strain Gage | Strain Gage | |
| Mounting Torque | 1400 in-lb | 158 Nm | |
| Deflection at Full Scale Capacity | 0.001 in | 0.03 mm | |
| Electrical Connector | PT02E-10-6P (2) | PT02E-10-6P (2) | |
智能型噪声分析仪-DUO
声级计应用
DUO作为声级计使用时，无论是手持或置于三脚架，DUO的控制操作，可直接使用内置的键盘和整合在仪器上的高分辨率的屏幕直接操作，或远程使用dBDUO的网络联机，或在无线通信终端作为远程控制（智能手机，互联网平板电脑，...），在这种情况下，用户可以移动远离几十米（Wi-Fi），不打扰它监视测量；也能以非常简单方式，以手动添加标记和注释事件，完成事件录音需求，进行更的后处理分析。
噪音监测站应用
01dB的创新：DUO智能型噪音监测终端，致力于实现的所有必备功能
· 防水的本体和麦克风
· 内置电池超过60小时的电池寿命
· 整合的Wi-Fi模块和3G调制解调器，永远能方便的从远程操作
· 嵌入式GPS模块，可与同步完成时间对时和地理参考的测量
· 自动定期多频电荷注入校准检查
· 异常事件侦测，电池电量低和异常移动的短信警讯通知
从短期测量至长期的噪音和环境噪音评估及气象监测，使DUO成为此类应用的新参考指标。
应用领域
DUO既可以用来作为声级计使用，或作为一般的环境噪音及气象评估的噪音监测站使用，因此设备应用不受限制，应用范围广泛，包括：施工现场噪音、交通噪音、城市噪音、铁路噪音、工业噪音、风力发电机(厂)噪音、航空噪音、休闲活动噪音...
我公司主要经营变频器，纠偏，触摸屏，PLC，伺服，限位开关，传感器，编码器等
我们的地址：上海市金山区吕巷镇干巷荣昌路318号3幢1018室
电话：021-59112701
联系手机： 期待您的咨询
